Forums > Education > How To INstall Win 98?
Kiranrizwi


Age: 30 Female
2028 days old here
Total Posts: 154
Points : 155

Location:
Quetta, Pakistan

Status : Offline
Subject : How To INstall Win 98?
INSTALLATION OF WINDOWS
If we want to install windows and give the partition to the hard disk
1. First go to computer system setup by restarting of your system by clicking of F1, F2, F10, F12, Delete and etc buttons. In this time one black screen will show to us in the black screen we have to find the BOOT ORDER, BOOT DEVICE, and etc
From first boot device or from boot order take the CD Room first then accept the changes go to exit from setup and save the changes and exit.
1. insert the windows bootable CD in CD rom drive.
2. It shows two options as you see in following lines.
• Boot from hard disk.
• Boot from CD rom.
So you must select the option “boot from CD rom”
And then press “enter”
3. Now the black screen applies us three options as you see in following lines.
? Start windows 98 setup from CD rom support.
? Start computer with CD rom support.
? Start computer with out CD rom support.
The option of “start windows 98 setup from CD rom support” directs us to apply setup of formatting directly.
The option of “start computer with CD rom support” shows the way of partition and deletion including CD rom support.
The option of “start computer with out CD rom support” it starts the computer with out CD rom support and setup.
Incase of deletion and giving partition so we must choose the option.
“Start computer with CD rom support”
And press “Enter”
Find the CD drive letter as G, H, I.
A:\>
See your CD room Drive support (D, E, F… … … …)
Write your CD room Drive support (D, E, F… … … …)
A:\>G:
Press enter key.
F:\>fdisk
Press enter key.
Do you wish to enable large disk support (Y/N)……………?
You must select [Y]
And then press enter key.
Micro soft windows 98
Fixed disk setup program
(c) copyright Microsoft corp.1983-1998.

FDISK OPTIONS
Current fixed disk drive: 1
Choose one of the following options
1. Create DOS partition or logical DOS drive.
2. Set active partition.
3. Delete partition or logical DOS drive.
4. Display partition information.
Item 4 displays the information about drives that deleted or parted to see the information choose the option.” Display partition information”
Press enter key.
Do you want to display the logical drive information (Y\N)……….?
Press [Y]
Press enter key to display the information.
To return to fdisk options press ESC key.
Item 3 deletes partitions and logical dos drives select the “Delete partition or logical DOS drives”
Press enter key.
Again it will apply [4]options and select one of the following options.
1) Delete primary DOS partition.
2) Delete extended DOS partition.
3) Delete logical DOS drive(s) in the extended DOS partition.
4) Delete Non-Dos partition.
You first delete logical DOS partition then extended DOS partition and then delete primary DOS partition.
If we have logical DOS drives partition in the extended drives then select the option [3]if you have only two drives as C,D then select the option [2]or if you have only one partition for example C then select the option [1].
To delete Non-DOS partition selects the option “Delete Non-DOS partition”
Press enter key.
What Non-DOS partition do you want to delete……..?[2]
Press enter key.
Press ESC to return to FDISK options.
And then select the options 3.
Press enter key.
What drive do you want delete. And select one of the option from the letters for example D, E, F,
Drv volume label mbytes system usage
D: 9549 FAT32 33%
select the option [D]
Press enter key.
Enter volume label if it has other wise press enter key.
Total extended DOS partition size is 28624 Mbytes (1 Mbyte =1048576 bytes)
Are you sure ………(Y\N)?
[Y]…….press enter key.
Then the drive will be deleted.
Press ESC key.
Drv volume label mbytes system usage
E: 9539 FAT32 30%
select the option [E]
Press enter key.
Enter volume label if it has other wise press enter key.
Total extended DOS partition size is 28624 Mbytes (1 Mbyte =1048576 bytes)
Are you sure ………(Y\N)?
[Y]…….press enter key.
Then the drive will be deleted.
Press ESC key.
Drv volume label mbytes system usage
F: FAT32 25%
select the option [F]
Press enter key.
Enter volume label if it has other wise press enter key.
Total extended DOS partition size is 28624 Mbytes (1 Mbyte =1048576 bytes)
Are you sure ………(Y\N)?
[Y]…….press enter key.
Then the drive will be deleted. Now the extended DOS partition has been completely deleted.
Press ESC key to return to FDISK options.
Now to delete primary DOS partition select the option 3 and press enter key.
“Delete partition or logical DOS drives”
Select the option 1 to delete primary DOS partition.
“Delete primary DOS partition”
Press enter key.
Drv volume label mbytes system usage
C: FAT32 40%
Do you want to delete primary DOS partition…….. [1]
Press enter key.
Enter volume label if it has other wise press enter key.
Are you sure ………(Y\N)?
[Y]…….press enter key.
Now the primary DOS partition will be deleted.
Press ESC key.]
So this was the way of deletion of hard disk partition in primary or in logical drives.
To see the active partitions in primary or in logical drives go to FDISK options and select the option [2]
“Set active partition”
Press enter key.
Press ESC key to return to FDISK options.
Now we are going to create DOS partition or logical DOS drives.
And it will give us three options as you see in following options in following lines.
Select the option 1 for creating DOS partition or logical DOS drives.
“create DOS partition or logical DOS drives”
press enter key for creating DOS partition or logical DOS drives.
1. Create primary DOS partition.
2. Create extended DOS partition.
3. Create logical DOS drives in the extended DOS partition.
So first we must select the option 1 to create primary DOS partition.
“Create primary DOS partition”
Press enter key.
Now it checks the errors in hard disk and it creates the partitions active.
Again it will give massage that
Do you wish to use the maximum available size for a primary DOS partition and makes the partition active (Y\N)…..?
[N]……Press enter key to create the partition in our choice.
The partition is completing after verifying.
And give partition to hard disk in percentage to drive C for example 33%.
Now the primary DOS partition is created.
Press ESC key to return to FDISK options.
Select the option 2 to create extended DOS partition and we will give percentage to the drive D,E,F.
“Create extended DOS partition”
press enter key to verify the drives.
Type the drive [D]
Press enter key.
The drive is verifying in percentage.
Apply partitions to the drives in percentage or in number.
Select the option 3to create extended DOS partition and we will give percentage to the drive D,E,F.
“Create logical DOS drives in the extended DOS partition”
press enter key to verify the drives.
Type the drive [E
Press enter key.
The drive is verifying in percentage.
Apply partitions to the drives in percentage or in number.
Select the option 3to create extended DOS partition and we will give percentage to the drive D, E, F.
“Create logical DOS drives in the extended DOS partition”
Press enter key to verify the drives.
Type the drive [F]
Press enter key.
The drive is verifying in percentage.
Apply partitions to the drives in percentage or in number.
Now the logical DOS drives in the extended DOS partition have been created.
Press ESC to return to FDISK options.
Press ESC to exit FDISK.
The drives have been successfully created now we must restart the computer before applying formats to drives.
After restarting the computer so you must select the option “boot from CD rom”
And then press enter
Select the option 2 to apply formats to drives.
The two way of applying formats to drives.
1:We can also apply format to drives from “start computer with CD rom support”
Press enter key.
Write the drives you want to format for example C,D,E, and F.
Format C:
Press enter key.
2:
? Start windows 98 setup from CD rom support.
Press enter key to start setup of drives.
Drive C 50% is formatting.
Press enter key.
Drive D 50% is formatting.
Press enter key.
Drive E 50% is formatting.
Press enter key.
Drive F 50% is formatting.
Press enter key.
After completing formatting of drives the setup checks the errors in drives other wise if there is no any errors and then press enter to exit blue screen.
Press enter key to start windows98 setup and write descriptions of user.



no likes.

Posted on December, 08 2012 04:11:48 PM


owaisk4u


Age: 29 Male
1759 days old here
Total Posts: 760
Points : 95

Location:
Karachi, Pakistan

Status : Offline
lolx 98 ka zama gaya :P

no likes.

Posted on December, 08 2012 06:45:29 PM

taimoorkhan


Age: 23 Male
1481 days old here
Total Posts: 2254
Points : 39

Location:
islambad, Pakistan

Status : Offline
mjhe ata ha tariqa ma ne khud ki ti pantium 3 par magar ab ma ni use krta ho dost

no likes.

Posted on April, 02 2013 10:50:41 AM

Hussainkhalid


Age: 20 Male
1494 days old here
Total Posts: 12991
Points : 8671

Location:
Dadu 76200, Pakistan

Status : Offline
window 98 iz old yar ,new one is windows 2007.

no likes.

Posted on April, 02 2013 02:14:26 PM

shahzadyaya


Age: 30 Male
2042 days old here
Total Posts: 211
Points : 200

Location:
quetta, Pakistan

Status : Offline
tell us how to install win server 7

no likes.

Posted on April, 02 2013 02:53:20 PM

Hussainkhalid


Age: 20 Male
1494 days old here
Total Posts: 12991
Points : 8671

Location:
Dadu 76200, Pakistan

Status : Offline
Windows 7 Installation Guide / Tutorial The Windows 7 is finally here. It's released for beta testers a few days
ago and I am here with a small step by
step picture guided tour through the
installation process. I downloaded the
x86 version of the M3 build ( build No:
6801) from Microsoft Connect site, which is 2.72 GB ISO. The x64 version
is around 3.2 GB in size.
The installation process was just like
vista setup and to my surprise
completed in just around 20 minutes
in my low end Virtual hardware. This surely indicates the performance
improvements Microsoft has put on
this windows vista replacement. The TestMachine I decided to install Windows 7 in a
VMware workstation first to make sure
that the DVD I burned is perfect.
VMware is great for taking screen
shots and screen captures also.
VMWare Version: VMWare Workstation 6.5 Virtual HArddisk : 9 GB RAM : 512 MB Processor : Single Core Windows Version : Windows 7 Ultimate M3 v6801-0-080913-2030 Preparing the DVD from the ISO
image Since most the people are installing
Windows 7 in a real hardware, a DVD
should be burned from the
downloaded ISO image. You will need
a DVD Burner, a DVD burning software
and a blank DVD-R or DVD-RW to prepare the installation disk. I used a
Sony single layer DVD-R as media and
used Nero 8 as the DVD burning
software. But for those who don't
have Nero installed, CDBurnerXP is a
free Alternative. So using the DVD burning software of
your choice burn the Windows 7 ISO
image to the DVD. Make sure you
choose the a very low burning speed,
4x or 8x, for better results. Setting up your Computer & BIOS
changes ( If required) Now reboot your computer after
popping in the all new Windows 7
DVD you just created in to the DVD
Drive. In most cases if you do this
you'll automatically boot in to the
Windows 7 Installation DVD. But in some cases if the Boot device order is
changed in the BIOS it may boot in to
your older OS, instead of our DVD. In
that case you'll need to change the
BIOS settings to gt it done ( More
details in a different tutorial). Booting Up and First Installation
Steps Steps from here are pretty straight
forward. Read the descriptions in each
pages before clicking the Next button to avoid any disasters. IF there is
options to choose in these steps you
may find them with each images. You may choose your Language options by selecting the dropdowns 'Language to install', 'Time and Currency format' and 'Keyboard or input method' here. I decided to leave everything to 'US' but it would be better for selecting the correct settings here for non-english users. This screen is where the installation wizard begins. The install now options will leads to the advanced install options. For repairing a corrupt installation the 'Repair your computer' button located at the bottom-left can be used. For fresh installs just click the Install now button. Tick the 'I accept the license terms' checkbox and click 'Next' to proceed. Which type of installation do you want? This screen provides two options, Upgrade and Custom (advanced). The upgrade option is for those who wish to upgrade an existing installation of older version of Windows to Windows 7. It is confirmed that Windows Vista can be upgraded to Windows 7 with out any issues, but Windows XP is still a problem. We will opt for the second option here, the Custom install. Where do you want to install Windows? Clicking on the 'Custom' button brings the install location selection screen. In the test machine we have an un- partitioned empty disk. But in the case of a normal installation all your hard drive partitions (e.g. C:\ , D:\ etc.) will be listed here. Choose the drive as you like (a 15 GB size is recommended). Make sure the drive don't have any important data or the Windows 7 installation will wipe-out the contents of that partition. You can backup the data to another partition (e.g. for installing in D:\ drive move important files from there to say E:\ drive or to an external usb drive) for safe keeping. Partitioning /Creating or Modifying Partitions Click the Drive options (advanced) for advanced partition management options like 'Delete', 'Format', 'New' and 'Extend'. To create a new partition click the New button. But if you have list of partitions in the previous screen, choose the one where you are planning to install windows 7 and click Format. Then click 'Next' to proceed. The 'New' option provides a text box to enter the size of the partition you wish to create in MBs. A 15 GB (15*1024 = 15360 MB) is recommended. In this case I opted for the full size of my virtual drive, i.e. 9216 MB. Click the Apply button to continue. You may be greeted with a message To ensure that all Windows features work correctly, windows might create additional partitions for system files. . This is a new feature in Windows 7 to have a small boot partition for system files. Click Okto continue. So here we are, A new primary partition of 8.8 GB is created along with a System type partition of 200 MB. Select the partition you just created and click Next to continue. All right, we are all set. The Windows 7 installation begins. time to grab a cup of coffee for and wait for 15 - 30 minutes for the all new OS!

no likes.

Posted on April, 02 2013 03:04:53 PM

Nagra123


Age: 27 Male
2046 days old here
Total Posts: 1078
Points : 234

Location:
Faisalabad, Pakistan

Status : Offline
yar windows 98 toh bohot puraani ho gyi hay
ab kon ye instal krta hay
ab toh windows 8 ka zmana h

no likes.

Posted on April, 02 2013 03:30:42 PM

inspiron


Age: 24 Male
1220 days old here
Total Posts: 1493
Points : 7

Location:
Faisalabad, Pakistan

Status : Offline
window tou ab hum nay aisay hi karn hi na

no likes.

Posted on December, 03 2013 06:57:16 PM

redstar


Age: 32 Male
1215 days old here
Total Posts: 929
Points : 1

Location:
Faisalabad, Pakistan

Status : Offline
win98 tou insatll hi nahin ki hai yaarrrr

no likes.

Posted on December, 04 2013 11:30:17 PM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
98 tou bohtu h purani hoo chuki hai bhai

no likes.

Posted on December, 08 2013 09:05:49 AM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
win 98 nay otu aisa hi kar dena tha na

no likes.

Posted on December, 08 2013 09:09:10 AM

racerbaby


Age: 27 Male
1191 days old here
Total Posts: 154
Points : 147

Location:
faisalabad, Pakistan

Status : Offline
window 8 ab kon instal karta hia bhai

no likes.

Posted on December, 23 2013 09:08:51 PM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
aap ko abhi tak instal karnay hi nahin aye hai

no likes.

Posted on January, 05 2014 12:53:32 PM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
install karnay ki kia zururat hia yaar hmmm

no likes.

Posted on January, 05 2014 12:57:50 PM

Hussainkhalid


Age: 20 Male
1494 days old here
Total Posts: 12991
Points : 8671

Location:
Dadu 76200, Pakistan

Status : Offline
WINDOWS 98 ABHI KOI USE NHI KRTA BHAI .

no likes.

Posted on January, 06 2014 06:55:12 AM

2waqar


Age: 27 Male
1193 days old here
Total Posts: 2325
Points : 35

Location:
Karachi, Pakistan

Status : Offline
it's better to install the xp....
itni jhanjat kon paly...

no likes.

Posted on January, 06 2014 01:08:58 PM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
install karna kon sa koi mushkil kam ahi yaar

no likes.

Posted on January, 30 2014 08:44:15 PM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
98 tu boht hi purani hoo gye hia yaar hmmm

no likes.

Posted on January, 30 2014 08:49:17 PM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
insatala main tu ab koi bhi naih jaye agaaa

no likes.

Posted on January, 30 2014 08:53:13 PM

abdulhannan05


Age: 24 Male
2205 days old here
Total Posts: 13123
Points : 261

Location:
Faisalabad, Pakistan

Status : Offline
install main janay a faida kia hia yaar hmmm

no likes.

Posted on January, 30 2014 08:58:22 PM

Hussainkhalid


Age: 20 Male
1494 days old here
Total Posts: 12991
Points : 8671

Location:
Dadu 76200, Pakistan

Status : Offline
abdul hannan bhai ap to old topics ko upar lay aarhay ho.

no likes.

Posted on January, 30 2014 09:11:52 PM