Conventional control panels with 2 zones or 4 zones expandable to 36
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036). The extreme compactness, trouble-free installation, uncomplicated programming procedures and simple end-user operation make this highly competitive control panel ideal for all small and medium applications, especially those applications where fast installation and programming are among the most important aspects of the system. The numerous functions (timers, equational logic, etc.), extensive flexibility (automatic output balancing, multifunction inputs, customizable outputs, gas function integration, etc.), and innovative connectivity capabilities (RS485 BUS for power supply stations, Internet connection, etc.), provide the tranquillity of knowing for sure that this powerful tool is capable of satisfying every need of every type of installation. SmartLine control panels have supervised outputs (one on the motherboard and one on each added expansion) for the activation of audio-visual signalling devices, a customizable relay output, fault signaling outputs and two 24V outputs (one constant and one interruptible by installer-defined conditions). Additionally, each detection zone provides a terminal which can be configured as: open-collector output (activated by programmable conditions), supervised input, or Gas 4-20mA detector interface. System information is provided through the graphic display and LEDs on the control panel frontplate. The RS485 BUS supports 4 remote repeater panels (SmartLetUSee/LCD-Lite). These repeater panels replicate all the fire alarm system data and allow users to access and control the system in accordance with their authorized access level. The BUS also supports two power-supply stations which can be connected in such a way as to allow supervision of their functionality and activation/deactivation of their output power during predefined conditions. Programming the system from the control panel is straightforward and trouble-free thanks to the easy-to-follow instructions on the display. The system can also be programmed by means of the SmartLeague software application. This intuitive programming software greatly simplifies the programming procedure. The SmartLAN/485 board allows the control panel to connect to an Ethernet network for remote access via the Internet. Once the remote connection has been established, it is possible to modify the configuration parameters, upload/download programming data and/or manage the system by means of the supervisory software based on SmartLook graphic maps.
SmartLevel
Power supply station connectable to the RS485 BUS (for supervision and management of the control panel power outputs). Refer to "Power supply stations".
Features and Technical specifications
Conventional fire-detection control panel.
Available with 2 zones, 4 zones expandable to 20, 4 zones expandable to 36
Certified EN54 / EN54-2
Certified EN12094-1 (Fire extinction)
Supports up to 32 devices per zone
Manages SmartLetLoose/ONE Fire Extinction board (Function EN12094-1 Approved)
1 supervised alarm output (NAC)
1 output for communicator/dialler activation
1 dry-contact alarm output
1 dry-contact fault output
1 ancillary power supply output
1 interruptible power supply output
1 additional terminal per zone configurable as: open-collector output, supervised input, Gas detector input with 4-20mA interface
Battery shutdown relay for deep discharge conditions
Backlit graphic display for easy management of Installer/User interface
Navigation keys for easy access to graphic display functions
Fast keys (Silence, Reset, Evacuate, Investigate)
RS485 BUS for the connection of Repeater panels and Power supply stations (SmartLevel)
Buzzer (provides audible signals)
8 Timers
8 logical equations
Automatic balancing of individual detector lines
RS232 connector for system programming from a PC
Programming software
Easy system programming from the control panel
Access key for Level 2 functions (EN54 compliant)
Thermal probe for battery optimization
Battery efficiency test
Extensive application of SMD reflux technology for higher reliability
Metal enclosure
Mains power supply 230Vac
Switching power supply/battery charger 1.4A @ 27.6Vdc (for SmartLine020) or 4A @ 27.6Vdc (for SmartLine036)
Battery housing for two 7Ah - 12V batteries (for SmartLine020) or two 17Ah - 12V batteries (for SmartLine036)
Dimensions (HxWxD for SmartLine020): 325x325x80mm - (HxWxD for SmartLine036): 497x380x87mm
Weight (without batteries): SmartLine020 = 3Kg; SmartLine036 = 6Kg
Fire extinguishing
Addition of a SmartLetLoose/ONE fire extinguishing board to any SmartLine series fire control panel provides the system with GAS extinguisher control capabilities in compliancy with EN12094-1. SmartLetLoose/ONE enhanced control panels provide all the functions required by the applicable normative and are capable of managing all devices required for fire detection system management (refer to "Accessory items for Fire extinguishing systems"). SmartLine fire extinguishing control panels can operate autonomously or can interface with addressable analogue control panels from the SmartLoop series by simply connecting them to the RS485 BUS of the latter (extinguishing stations for addressable systems).
Diagram key
A: line 1 detectors.
B: line 2 detectors.
C: SmartLine fire extinguishing control
panel.
D: gas extinguisher cylinders.
E: gas release nozels
F: gas collectors.
G: pneumatic release valve.
H: pilot cylinder for gas release.
I: pilot cylinder electrovalve.
L: pressure switch.
M: manual activation button.
N: stop extinguisher gas button..
O: audio visual gas-release-imminent indicator.
P: audio visual gas-present indicator.
Main Features
Certified EN12094-1
Microcontroller board supervised by the CPU
Indicator LEDs (status, disabled, faults)
Supervised terminals for manual fire extinguishing commands
Supervised terminals for STOP fire extinguishing commands
Supervised terminals for pressure switch control
Supervised output for fire suppression system activation
Supervised output for signaling activation (pre-extinguish)
Supervised output for "Gas in area" signaling
Oreder codes
SmartLine020-2: non-expandable 2 zone conventional control panel
SmartLine020-4: conventional control panel with 4 zones expandable to 20
SmartLine036: conventional control panel with 4 zones expandable to 36
SmartLine/8Z: 8 zone expansion board
SmartLAN/485: ethernet connection board
SmartLetLoose/ONE: fire suppression board
SmartLetUSee/LCD-Lite: remote-control repeater panel for SmartLine and SmartLight control panels
SmartLeague: programming and management software
Link232F9F9: RS232 cable link between PC and INIM devices
IPS24040: switching power supply/battery charger
[email protected] IPS24140: switching power supply/battery charger
[email protected] ProbeTH: thermal probe for optimized battery charge
Programming software
The SmartLeague programming and management software is intuitive and simple to use. This indispensable tool allows security professionals to control INIM fire detection systems with ease. It allows fast and easy control panel configuration and offers an overall view of the system. It is also capable of providing detailed wiring diagrams of the system terminals in accordance with the configured settings.